Ncurses Functions
Table of Contents
- ncurses_addch - Add character at current position and advance cursor
- ncurses_addchnstr - Add attributed string with specified length at current position
- ncurses_addchstr - Add attributed string at current position
- ncurses_addnstr - Add string with specified length at current position
- ncurses_addstr - Output text at current position
- ncurses_assume_default_colors - Define default colors for color 0
- ncurses_attroff - Turn off the given attributes
- ncurses_attron - Turn on the given attributes
- ncurses_attrset - Set given attributes
- ncurses_baudrate - Returns baudrate of terminal
- ncurses_beep - Let the terminal beep
- ncurses_bkgd - Set background property for terminal screen
- ncurses_bkgdset - Control screen background
- ncurses_border - Draw a border around the screen using attributed characters
- ncurses_bottom_panel - Moves a visible panel to the bottom of the stack
- ncurses_can_change_color - Checks if terminal color definitions can be changed
- ncurses_cbreak - Switch of input buffering
- ncurses_clear - Clear screen
- ncurses_clrtobot - Clear screen from current position to bottom
- ncurses_clrtoeol - Clear screen from current position to end of line
- ncurses_color_content - Retrieves RGB components of a color
- ncurses_color_set - Set active foreground and background colors
- ncurses_curs_set - Set cursor state
- ncurses_def_prog_mode - Saves terminals (program) mode
- ncurses_def_shell_mode - Saves terminals (shell) mode
- ncurses_define_key - Define a keycode
- ncurses_del_panel - Remove panel from the stack and delete it (but not the associated window)
- ncurses_delay_output - Delay output on terminal using padding characters
- ncurses_delch - Delete character at current position, move rest of line left
- ncurses_deleteln - Delete line at current position, move rest of screen up
- ncurses_delwin - Delete a ncurses window
- ncurses_doupdate - Write all prepared refreshes to terminal
- ncurses_echo - Activate keyboard input echo
- ncurses_echochar - Single character output including refresh
- ncurses_end - Stop using ncurses, clean up the screen
- ncurses_erase - Erase terminal screen
- ncurses_erasechar - Returns current erase character
- ncurses_filter - Set LINES for iniscr() and newterm() to 1
- ncurses_flash - Flash terminal screen (visual bell)
- ncurses_flushinp - Flush keyboard input buffer
- ncurses_getch - Read a character from keyboard
- ncurses_getmaxyx - Returns the size of a window
- ncurses_getmouse - Reads mouse event
- ncurses_getyx - Returns the current cursor position for a window
- ncurses_halfdelay - Put terminal into halfdelay mode
- ncurses_has_colors - Checks if terminal has color capabilities
- ncurses_has_ic - Check for insert- and delete-capabilities
- ncurses_has_il - Check for line insert- and delete-capabilities
- ncurses_has_key - Check for presence of a function key on terminal keyboard
- ncurses_hide_panel - Remove panel from the stack, making it invisible
- ncurses_hline - Draw a horizontal line at current position using an attributed character and max. n characters long
- ncurses_inch - Get character and attribute at current position
- ncurses_init_color - Define a terminal color
- ncurses_init_pair - Define a color pair
- ncurses_init - Initialize ncurses
- ncurses_insch - Insert character moving rest of line including character at current position
- ncurses_insdelln - Insert lines before current line scrolling down (negative numbers delete and scroll up)
- ncurses_insertln - Insert a line, move rest of screen down
- ncurses_insstr - Insert string at current position, moving rest of line right
- ncurses_instr - Reads string from terminal screen
- ncurses_isendwin - Ncurses is in endwin mode, normal screen output may be performed
- ncurses_keyok - Enable or disable a keycode
- ncurses_keypad - Turns keypad on or off
- ncurses_killchar - Returns current line kill character
- ncurses_longname - Returns terminals description
- ncurses_meta - Enables/Disable 8-bit meta key information
- ncurses_mouse_trafo - Transforms coordinates
- ncurses_mouseinterval - Set timeout for mouse button clicks
- ncurses_mousemask - Sets mouse options
- ncurses_move_panel - Moves a panel so that its upper-left corner is at [startx, starty]
- ncurses_move - Move output position
- ncurses_mvaddch - Move current position and add character
- ncurses_mvaddchnstr - Move position and add attributed string with specified length
- ncurses_mvaddchstr - Move position and add attributed string
- ncurses_mvaddnstr - Move position and add string with specified length
- ncurses_mvaddstr - Move position and add string
- ncurses_mvcur - Move cursor immediately
- ncurses_mvdelch - Move position and delete character, shift rest of line left
- ncurses_mvgetch - Move position and get character at new position
- ncurses_mvhline - Set new position and draw a horizontal line using an attributed character and max. n characters long
- ncurses_mvinch - Move position and get attributed character at new position
- ncurses_mvvline - Set new position and draw a vertical line using an attributed character and max. n characters long
- ncurses_mvwaddstr - Add string at new position in window
- ncurses_napms - Sleep
- ncurses_new_panel - Create a new panel and associate it with window
- ncurses_newpad - Creates a new pad (window)
- ncurses_newwin - Create a new window
- ncurses_nl - Translate newline and carriage return / line feed
- ncurses_nocbreak - Switch terminal to cooked mode
- ncurses_noecho - Switch off keyboard input echo
- ncurses_nonl - Do not translate newline and carriage return / line feed
- ncurses_noqiflush - Do not flush on signal characters
- ncurses_noraw - Switch terminal out of raw mode
- ncurses_pair_content - Retrieves foreground and background colors of a color pair
- ncurses_panel_above - Returns the panel above panel
- ncurses_panel_below - Returns the panel below panel
- ncurses_panel_window - Returns the window associated with panel
- ncurses_pnoutrefresh - Copies a region from a pad into the virtual screen
- ncurses_prefresh - Copies a region from a pad into the virtual screen
- ncurses_putp - Apply padding information to the string and output it
- ncurses_qiflush - Flush on signal characters
- ncurses_raw - Switch terminal into raw mode
- ncurses_refresh - Refresh screen
- ncurses_replace_panel - Replaces the window associated with panel
- ncurses_reset_prog_mode - Resets the prog mode saved by def_prog_mode
- ncurses_reset_shell_mode - Resets the shell mode saved by def_shell_mode
- ncurses_resetty - Restores saved terminal state
- ncurses_savetty - Saves terminal state
- ncurses_scr_dump - Dump screen content to file
- ncurses_scr_init - Initialize screen from file dump
- ncurses_scr_restore - Restore screen from file dump
- ncurses_scr_set - Inherit screen from file dump
- ncurses_scrl - Scroll window content up or down without changing current position
- ncurses_show_panel - Places an invisible panel on top of the stack, making it visible
- ncurses_slk_attr - Returns current soft label key attribute
- ncurses_slk_attroff - Turn off the given attributes for soft function-key labels
- ncurses_slk_attron - Turn on the given attributes for soft function-key labels
- ncurses_slk_attrset - Set given attributes for soft function-key labels
- ncurses_slk_clear - Clears soft labels from screen
- ncurses_slk_color - Sets color for soft label keys
- ncurses_slk_init - Initializes soft label key functions
- ncurses_slk_noutrefresh - Copies soft label keys to virtual screen
- ncurses_slk_refresh - Copies soft label keys to screen
- ncurses_slk_restore - Restores soft label keys
- ncurses_slk_set - Sets function key labels
- ncurses_slk_touch - Forces output when ncurses_slk_noutrefresh is performed
- ncurses_standend - Stop using 'standout' attribute
- ncurses_standout - Start using 'standout' attribute
- ncurses_start_color - Initializes color functionality
- ncurses_termattrs - Returns a logical OR of all attribute flags supported by terminal
- ncurses_termname - Returns terminals (short)-name
- ncurses_timeout - Set timeout for special key sequences
- ncurses_top_panel - Moves a visible panel to the top of the stack
- ncurses_typeahead - Specify different filedescriptor for typeahead checking
- ncurses_ungetch - Put a character back into the input stream
- ncurses_ungetmouse - Pushes mouse event to queue
- ncurses_update_panels - Refreshes the virtual screen to reflect the relations between panels in the stack
- ncurses_use_default_colors - Assign terminal default colors to color id -1
- ncurses_use_env - Control use of environment information about terminal size
- ncurses_use_extended_names - Control use of extended names in terminfo descriptions
- ncurses_vidattr - Display the string on the terminal in the video attribute mode
- ncurses_vline - Draw a vertical line at current position using an attributed character and max. n characters long
- ncurses_waddch - Adds character at current position in a window and advance cursor
- ncurses_waddstr - Outputs text at current postion in window
- ncurses_wattroff - Turns off attributes for a window
- ncurses_wattron - Turns on attributes for a window
- ncurses_wattrset - Set the attributes for a window
- ncurses_wborder - Draws a border around the window using attributed characters
- ncurses_wclear - Clears window
- ncurses_wcolor_set - Sets windows color pairings
- ncurses_werase - Erase window contents
- ncurses_wgetch - Reads a character from keyboard (window)
- ncurses_whline - Draws a horizontal line in a window at current position using an attributed character and max. n characters long
- ncurses_wmouse_trafo - Transforms window/stdscr coordinates
- ncurses_wmove - Moves windows output position
- ncurses_wnoutrefresh - Copies window to virtual screen
- ncurses_wrefresh - Refresh window on terminal screen
- ncurses_wstandend - End standout mode for a window
- ncurses_wstandout - Enter standout mode for a window
- ncurses_wvline - Draws a vertical line in a window at current position using an attributed character and max. n characters long